gcformeornot
07-20 09:49 AM
Check your PM. This is what i sent.
Can you please PM to me too?
Thanks.
Can you please PM to me too?
Thanks.
wallpaper 2011 sweet cartoon girl
add78
05-15 06:02 PM
Guys, This discussion has no relevance if the bills won't pass. So it is extremely important to call the specific House members. We are not trying to filibuster whatever you chose to dicuss. However, we are in crunch time and need all hands on the deck to gather support for the three bills. Please Please call the House members listed in this thread:
http://immigrationvoice.org/forum/showthread.php?t=19113
This is the most important thing right now. Kindly help.
Thank You!
I completely agree. I have called all.
http://immigrationvoice.org/forum/showthread.php?t=19113
This is the most important thing right now. Kindly help.
Thank You!
I completely agree. I have called all.
NKR
07-25 11:21 AM
Look back and recall the time when you told yourself that if you ever made it to the US, you are going to visit place A or do thing B. Go kayaking, enjoy the countryside, join a hiking group, play some sports and etc. US have lots to offer us if we just let go and start enjoying life. Good Luck!!
Probably he wants to quit his employer, move on to a better paying job and do all that you have asked him to do :)
Probably he wants to quit his employer, move on to a better paying job and do all that you have asked him to do :)
2011 danger girl wallpaper,
dingdong12
06-17 05:03 PM
I support this
more...
wellwishergc
04-10 07:24 PM
Berkeley,
I am of the opinion that issues such as 'allowing I-485 even if visa data not current' or 'allowing for application of EAD once I-140 approved' could be addressed by urging appropriate agencies to make changes to the existing regulations. As bharnik pointed out there is no effect on the visa numbers for the USCIS, by allowing this. While we fight and wait for legislation, this is a very good short-term relief.
Is it possible for IV to brain-storm on this? and come up with an approach to address this, without having to go through the congress?..
Please advise..
Sincerely,
Raj
bkarnik,
Excellent, creative question. Alas, the answer to this lies not in the INA itself but the Code of Federal Regulations.
To be specific, 8 CFR 274 a.12(c) (9) (http://a257.g.akamaitech.net/7/257/2422/01jan20061500/edocket.access.gpo.gov/cfr_2006/janqtr/pdf/8cfr274a.12.pdf) is what allows employment authorization at the adjustment of status stage. See page 658 of the linked document.
I was about to write an explanation of 8 CFR 274, but then I found this excellent summary which describes the regulation of the employment of aliens http://www.coane.com/pdfs/workpermits.pdf
Now how do we go about changing this provision to include I-140 -- not sure.
However, it is simply a case of moving the ball around --
either you ask that people be able to file adjustment of status even if visa numbers are not available
OR
you ask that 8 CFR 274 a.12(c) (9) be amended so that people with approved I-140s be allowed to get EADs and Advance Parole.
I am of the opinion that issues such as 'allowing I-485 even if visa data not current' or 'allowing for application of EAD once I-140 approved' could be addressed by urging appropriate agencies to make changes to the existing regulations. As bharnik pointed out there is no effect on the visa numbers for the USCIS, by allowing this. While we fight and wait for legislation, this is a very good short-term relief.
Is it possible for IV to brain-storm on this? and come up with an approach to address this, without having to go through the congress?..
Please advise..
Sincerely,
Raj
bkarnik,
Excellent, creative question. Alas, the answer to this lies not in the INA itself but the Code of Federal Regulations.
To be specific, 8 CFR 274 a.12(c) (9) (http://a257.g.akamaitech.net/7/257/2422/01jan20061500/edocket.access.gpo.gov/cfr_2006/janqtr/pdf/8cfr274a.12.pdf) is what allows employment authorization at the adjustment of status stage. See page 658 of the linked document.
I was about to write an explanation of 8 CFR 274, but then I found this excellent summary which describes the regulation of the employment of aliens http://www.coane.com/pdfs/workpermits.pdf
Now how do we go about changing this provision to include I-140 -- not sure.
However, it is simply a case of moving the ball around --
either you ask that people be able to file adjustment of status even if visa numbers are not available
OR
you ask that 8 CFR 274 a.12(c) (9) be amended so that people with approved I-140s be allowed to get EADs and Advance Parole.
psaxena
05-20 05:37 PM
There should a seperate quota for immigrants from Jhumri Talliya
In the same lines as H1B, could we look into if its possible to add a quota for US Masters degree holders irrespective of country of birth for green Card also. This would be in addition to the existing Employment based quotas.
Does anyone know how they added 20k H1B quota for Masters degree holders? Who sponsored that bill? May be we should talk to the same people.
I would think there would be a little less resistance for this? This would ease the pressure on both EB2 and EB3.
I dont know if this has been previously looked at. I know there were talks of excluding these people from quota all together.
In the same lines as H1B, could we look into if its possible to add a quota for US Masters degree holders irrespective of country of birth for green Card also. This would be in addition to the existing Employment based quotas.
Does anyone know how they added 20k H1B quota for Masters degree holders? Who sponsored that bill? May be we should talk to the same people.
I would think there would be a little less resistance for this? This would ease the pressure on both EB2 and EB3.
I dont know if this has been previously looked at. I know there were talks of excluding these people from quota all together.
more...
Berkeleybee
04-10 09:05 PM
IV has the clout now to approach agencies, explain to them our argument and see if we are able to convince them for short-term reliefs. It is just a matter of trying.
I'm smiling. We will certainly try, but the part above (clout etc) would be an overstatement of our current levels of access. :)
Note that these are the same agencies that have been resisting our efforts to get even the most basic breakdown of data.
best,
Berkeleybee
I'm smiling. We will certainly try, but the part above (clout etc) would be an overstatement of our current levels of access. :)
Note that these are the same agencies that have been resisting our efforts to get even the most basic breakdown of data.
best,
Berkeleybee
2010 Featured Wallpaper
sandy_anand
11-06 12:11 PM
Does anyone know when VB will be out this month?
more...
saurav_4096
01-04 03:07 PM
Let me acknowledge..This thread made me easily come out of holiday blues. Above thats its friday...!!!!
My take on this situation....ask your freind to apply for concurent H1b's..it works out well with concurent wives...!!!!:):):) He can bring one wife on each visa..!!!!
May be he can apply for blanket H4...
My take on this situation....ask your freind to apply for concurent H1b's..it works out well with concurent wives...!!!!:):):) He can bring one wife on each visa..!!!!
May be he can apply for blanket H4...
hair dresses sweet cartoon girl
pady
08-21 08:55 AM
May be it's true that labor and 140 belongs to the company, but they just can't take money from employees and sell it to someone.
more...
actaccord
01-31 08:56 AM
to find anything related to the patent in uspto.gov
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
hot sweet cartoon girl wallpaper. 3d Cartoon Girl Wallpaper.
sandy_anand
11-25 06:42 PM
Thanks a million, core team, for the effort!!!!!! As many have already raised the issue, can you please clarify that core does indeed forecast a jump of nearly 3 years for EB-2 India between Jul-10 and Oct-10?
more...
house makeup sweet cartoon girl
shreekhand
04-14 08:14 PM
Now, it is certainly ridiculous for you and your spouse to renew your drivers license's every 6 months...
That said, it is not a wild assumption that a decision on a I-485 application cannot be made in 6 months, all of those who are not retrogressed get it in that time frame...
Further, since the DMV actually checks the status with USCIS... (in most states) why would they care what the document says ?
I just got back from a lengthy fight with my local and state DMV offices to convince them I'm legal to continue having a drivers license. I'm EB, in the adjustment of status stage since July 2007. DMV asked me recently for proof for status check. I took the pending I-485 receipt and while they told me it is an acceptable proof, they said they have a rule that if the document has no expiration date, they can only give you a driver license with validity 6 months beyond the receipt date of your document (with the wild assumption that any I-485 application is approved or denied within 6 months)
I have nothing against local government and their agencies enforcing immigration, but if you won't give your staff the necessary training to comprehend what legal immigration status is then it will be a disaster
That said, it is not a wild assumption that a decision on a I-485 application cannot be made in 6 months, all of those who are not retrogressed get it in that time frame...
Further, since the DMV actually checks the status with USCIS... (in most states) why would they care what the document says ?
I just got back from a lengthy fight with my local and state DMV offices to convince them I'm legal to continue having a drivers license. I'm EB, in the adjustment of status stage since July 2007. DMV asked me recently for proof for status check. I took the pending I-485 receipt and while they told me it is an acceptable proof, they said they have a rule that if the document has no expiration date, they can only give you a driver license with validity 6 months beyond the receipt date of your document (with the wild assumption that any I-485 application is approved or denied within 6 months)
I have nothing against local government and their agencies enforcing immigration, but if you won't give your staff the necessary training to comprehend what legal immigration status is then it will be a disaster
tattoo makeup sweet cartoon girl
GCneeded
07-13 02:30 PM
Congratulations and Thanks for the contribution.
more...
pictures house sweet cartoon girl
EB2_Jun03_dude
05-08 11:42 AM
Just like many of us, I am living in this country legally for the last 10 years. After some anxious 5 years wait, I finally got GC last month. IV is definitely the best thing to happen to legal-immigration in US.
Many of us come to this country to escape the rotten bureaucracy in our native places and are completely taken back when we face a similar system in US. The work IV is doing and can do is enormous.
Getting GC is an important milestone in an immigrant's journey. But again remember it is just a milestone and not the destination(CZship). I know you do not want to look beyond GC, but after surviving through the GC processs and paying regular taxes for 10 years I think we deserve a speed pass for CZship and should not sent in another line.
I wish all IV members a fast and safe GC/CZ journey !
Many of us come to this country to escape the rotten bureaucracy in our native places and are completely taken back when we face a similar system in US. The work IV is doing and can do is enormous.
Getting GC is an important milestone in an immigrant's journey. But again remember it is just a milestone and not the destination(CZship). I know you do not want to look beyond GC, but after surviving through the GC processs and paying regular taxes for 10 years I think we deserve a speed pass for CZship and should not sent in another line.
I wish all IV members a fast and safe GC/CZ journey !
dresses Featured Wallpaper
gvenkat
11-09 05:28 PM
When should I start rumbling?
Filed Date : Aug 30th 2010
Receiept date : Aug 30th 2010
SLUD's thrice : 09/03,09/10 and 11/05
E-filed, Texas Service center and sent in supporting docs.
No emails or anything so far... Should i wait the whole 90 days before starting to make some noises?
I filed my EAD on the same date at Nebraska recieved that last week.
I just cannot understand why they need to do this filing and can't make EAD/AP a single doc and valid for two years.. Just plain frustrated. :mad:
Filed Date : Aug 30th 2010
Receiept date : Aug 30th 2010
SLUD's thrice : 09/03,09/10 and 11/05
E-filed, Texas Service center and sent in supporting docs.
No emails or anything so far... Should i wait the whole 90 days before starting to make some noises?
I filed my EAD on the same date at Nebraska recieved that last week.
I just cannot understand why they need to do this filing and can't make EAD/AP a single doc and valid for two years.. Just plain frustrated. :mad:
more...
makeup dresses sweet cartoon girl
MahaBharatGC
12-02 10:24 AM
Santa,
Thanks for your response.
Education evaluation was not done for bachelors because the Labor only required masters. My attorney is planning to use 2 years of my experience to compensate for the additional 1 year of bachelors degree
H1Girl,
Thanks for your response.
Even my attorney says the argument of USCIS could be "building blocks" argument i.e. In US, for masters, 4 year bachelors is required. But, I only have a 3 year bachelor degree.
My suggestion to you is to get your Bachelors also evaluated. Whether it requires for job or not but you need to demonstrate at least 16 years of education. So, you need to get evaluated how each degree you possess equivalent to US qualifications.
Thanks for your response.
Education evaluation was not done for bachelors because the Labor only required masters. My attorney is planning to use 2 years of my experience to compensate for the additional 1 year of bachelors degree
H1Girl,
Thanks for your response.
Even my attorney says the argument of USCIS could be "building blocks" argument i.e. In US, for masters, 4 year bachelors is required. But, I only have a 3 year bachelor degree.
My suggestion to you is to get your Bachelors also evaluated. Whether it requires for job or not but you need to demonstrate at least 16 years of education. So, you need to get evaluated how each degree you possess equivalent to US qualifications.
girlfriend Girl Cartoon Wallpaper
vvr
05-20 02:21 AM
Way to shine guys ! Any more suggestions for a "brand new" quota ?
hairstyles Very Sweet iPhone Wallpaper
pyrosleepy
07-31 09:59 AM
I called USCIS NSC yesterday and asked if my new approved I-140 was interfiled with my pending I-485. The IO asked me for my A# and then told me that she doesn't see the new I-140 starting with SRC on the system. She only sees the original I-140 with the LIN. It was very frustrating to hear this as I had called NSC a week before and the IO told me that the new I-140 is in the system and visa was available for me. However, I remembered that last week the IO did not ask me for my A#. She only asked for the receipt numbers of my pending I-485 and the new I-140.
Friends, what else can I do to make sure that my newly approved I-140 under EB2 is interfiled?
Friends, what else can I do to make sure that my newly approved I-140 under EB2 is interfiled?
gc_in_30_yrs
09-14 06:33 PM
gc_in_30_yrs
Your ideas are like this !!!!!!!!!!!!!!!!
��՟��� ���p�� �X� �Æ�Z-X�A �X������
�����-骜�f ��֪���, ��u��-{՜�:��՟��� >��x ��M-��թ� ƪ��-��j� X����-Ō�� ��C��-�ê��... ���p ���F-��-¹�-�֪� ��Ō%-Ōy��� X�J-�ĩ� ��¹~-Ō�� '����-��կ� ��՜� ���-�o��q Ƣ�� ��-�-X�-��բ��� N��ǒ�� ���Jh�-*�C. Ō�� �X���u¹ ���*-¹�� ���p ��X�-��d� '��t��d ��M-�Ϣ-����Xj ��u��Eo �X�͌�-J�-*�C. >��x-��n-��� ��M��� ��բ��â��� ƢC-���h�o NP��d 殫�¹� ��Ǣ�� ���Jh�X�� �ë��� ��� �X�����բ. ��M��� ��բ��â��E�� ���-��uX�h ���Jh�X�� �ë��� X�{x ��Ǫ�Ō �X�-��-��Z-X�A ��j��-��-�Ϣ�� 冑�-��� �G�-ʢ-��-ʩ� ��L-�Ī��. -�ժ�-��jX�� E��-��-�ǟ� ꪢ>�� �.�-��.�. ���Jh�X�� �G��-*�C.
vGayalu - thanks for letting us know your ideas in the latest fashion.
these are my thoughts not ideas.
I welcome and encourage everyone to share their thoughts / opinions. I learned some good points from these posts today.:)
Your ideas are like this !!!!!!!!!!!!!!!!
��՟��� ���p�� �X� �Æ�Z-X�A �X������
�����-骜�f ��֪���, ��u��-{՜�:��՟��� >��x ��M-��թ� ƪ��-��j� X����-Ō�� ��C��-�ê��... ���p ���F-��-¹�-�֪� ��Ō%-Ōy��� X�J-�ĩ� ��¹~-Ō�� '����-��կ� ��՜� ���-�o��q Ƣ�� ��-�-X�-��բ��� N��ǒ�� ���Jh�-*�C. Ō�� �X���u¹ ���*-¹�� ���p ��X�-��d� '��t��d ��M-�Ϣ-����Xj ��u��Eo �X�͌�-J�-*�C. >��x-��n-��� ��M��� ��բ��â��� ƢC-���h�o NP��d 殫�¹� ��Ǣ�� ���Jh�X�� �ë��� ��� �X�����բ. ��M��� ��բ��â��E�� ���-��uX�h ���Jh�X�� �ë��� X�{x ��Ǫ�Ō �X�-��-��Z-X�A ��j��-��-�Ϣ�� 冑�-��� �G�-ʢ-��-ʩ� ��L-�Ī��. -�ժ�-��jX�� E��-��-�ǟ� ꪢ>�� �.�-��.�. ���Jh�X�� �G��-*�C.
vGayalu - thanks for letting us know your ideas in the latest fashion.
these are my thoughts not ideas.
I welcome and encourage everyone to share their thoughts / opinions. I learned some good points from these posts today.:)
hindu_king
08-14 11:01 AM
I think re-filing is a waste of time and energy. whatever's going to happen will happen.
